CS92x, CX92x, MS911, MX91x Staple Punch Finisher (3-Hole)
기능
- 용지 관리
- 제품 크기 (mm - H x W x D): 1065 x 641 x 658 mm
- 중량 (kg): 43.2 kg
제품 설명
Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.
Upper Bin 1
The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor.
Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes.
Considerations
The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only.
Lower Bin 2
The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor.
The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.
일반 사양
| 부품 번호 | 26Z0081 |
|---|---|
| 제품 크기 (mm - H x W x D) |
|
| 중량 (kg) |
|
| 패키지 크기 (mm - H x W x D) |
|
| 패키지 중량(kg) |
|
용지 취급
| 지원되는 용지 종류 |
|
|---|---|
| 용지 무게 지원 범위 |
|
| 마감 기능 |
|
전기 및 작동
| UNSPSC 코드 |
|
|---|---|
| 원산지 |
|
