Forms and Bar Code Card

Bagian no.: 21K0127

Fitur

  • Application Solutions

Deskripsi Produk

The Lexmark Forms and Bar Code Card is designed to accept electronic forms generated using Lexmark Forms Composer and saved in flash memory or hard disk in Lexmark printers using Lexmark Forms Manager. Requires either flash memory or a hard disk for electronic form storage in the MFP or printer. Merge and quickly print forms using only the variable ASCII text data transmitted over the network. This card supports PCL® and PostScript command access for more than 47 industry standard one-and two-dimensional bar codes. Use Lexmark Forms Manager to upload and manage forms, to update firmware and to change the mode. Only one of these cards may be used at any time: Forms and Bar Code, Card for IPDS or Card for PRESCRIBE. These cards are installed in the same single connector.

Consideration

Only one of these cards may be used at any time: Forms and Bar Code, Card for IPDS or Card for PRESCRIBE. These cards are installed in the same single connector.


Fast and easy to deploy!

Forms are stored in the printer so there is no server to configure and maintain. There is also a low initial investment for a small number of printing devices.


Simple Data Merge

This card works with Ethernet networks for any host using ASCII, SAP RDI (with Lexmark SAP® R/3® Device Type for PCL) or PCL data. It also supports PCL® and PostScript command access for more than 47 industry standard one-and two-dimensional bar codes.


Lexmark Forms Manager

Use Lexmark Forms Manager to upload and manage forms, to update firmware and to change the mode (Print, Data Capture, Disabled, Archive* and Print, and Archive* Only) of the card. *Archive modes require a hard disk.


Generate forms and save in printer

The Lexmark Forms and Bar Code Card is designed to accept electronic forms generated using Lexmark Forms Composer and saved in flash memory or hard disk in Lexmark printers using Lexmark Forms Manager. Requires either flash memory or a hard disk for electronic form storage in the MFP or printer.


Merge and Print

Merge and quickly print forms using only the variable ASCII text data transmitted over the network. This card monitors incoming ASCII, SAP RDI or PCL data. In the event that incoming data contains a pattern consistent with conditions set in a resident electronic form, a form merge process is initiated.

Spesifikasi Umum

Bagian no. 21K0127
Ukuran Kemasan (mm - Tinggi x Lebar x Dimensi)
  • 40 x 230 x 150 mm
Berat Kemasan, kg
  • 0.13 kg

Kelistrikan & Operasi

Kode UNSPSC
  • 44101726
Negara Asal
  • United States

Lexmark CX860de

Lexmark CX860de

Lihat produk

Lexmark CS820de

Lexmark CS820de

Lihat produk

Lexmark CX820de

Lexmark CX820de

Lihat produk

Lexmark CX825de

Lexmark CX825de

Lihat produk