C925 RS-232C Serial Interface Card Kit

The RS-232C Serial Interface Card installs into the printer's internal port. It supports a standard RS-232C interface using a 25-pin D-shell female connector. For use with Lexmark printers that contain an open slot.

RS-422 is not supported.

See the Technical Reference for more information about the serial and parallel interfaces.

Configuration settings for the serial interface are available using the Serial Opt Menu from the printer's operator panel. Baud rates from 1200 to 115.2K are supported.

Baud rates:1200, 2400, 4800, 9600*, 19.2K, 38.4K, 57.6K and 115.2K; 7 bit or 8* data bits; Parity - Odd, Even, None*, Ignore; Start and Stop Bits; DSR/DTR Data Flow control with DTR pacing, DTR/DSR, XON/XOFF, XON/XOFF/DTR, or XON/XOFF/DTR/DSR flow control protocols. * indicates factory defaults