T64x RFID UHF Option

Australia – supports radio frequencies in the 915-928 MHz (ultra high frequency) range.

The top edge of the tag should be located 0.2 to 0.5 inches (5 to 12 mm) from the top edge of the media.

Europe – supports radio frequencies in the 869.7 – 870.0 MHz (ultra high frequency) range.

Other locations for the RFID tag may be acceptable. Please consult with the Lexmark Specialty Media Support Group for additional information. Do not place a large order for media without first verifying that the selected media design provides acceptable printing performance and transport reliability, and that the selected RFID tag is successfully programmed by the RFID Option.

RFID Tag Specifications

All RFID tags must be built to EPC class 1 generation 2 specifications (ISO 18000-6C).

See the RFID UHF Option User’s Guide Supplement for tag placement details.

RFID Tag Location

The RFID tag can be located on either the printed or non-printed side of the media, although printing on the tag is not recommended.

The RFID tag orientation should be with the long dimension of the tag perpendicular to the paper feed direction.

RFID Radio Specifications

US / Canada – supports radio frequencies in the 902-928 MHz (ultra high frequency (UHF)) range.

The center of the RFID tag should be located approximately 3.5 inches (89 mm) from the left edge of the media when looking at the printed side of the media with the tag at the top of the page. If the selected RFID tag is less than 3.5 inches (89 mm) wide, the location of the tag should be shifted toward the center of the sheet to keep the right edge of the tag under the right side pick tire.